Production and performance of physically activated carbon from Bambusa vulgaris
DOI:
https://doi.org/10.4336/2019.pfb.39e201801668Keywords:
Adsorbents, Bamboo, Resource managementAbstract
Activated carbon (AC) was produced from Bambusa vulgaris to evaluate its potential of methylene blue dye (MB) adsorption. AC was prepared by direct physical activation, using the water vapor as activating agent. It was characterized considering the gravimetric yield of AC, the pH point of zero charge, Boehm titration method, surface area, volume and pore diameter analysis and superficial morphology. The application of AC was performed with kinetic studies and adsorption isotherms by the Langmuir and Freundlich isotherm models. The material produced presented surface area of 684.69 m2 g-1, pH point of zero chargeof 7.32 and predominance of acidic groups on their surface. By the micrographs analysis it was possible to verify the development of the material porosity due to activation. The maximum adsorption capacity for the MB dye was 301.07 mg g-1 the Langmuir model presented the best adjustment. The AC obtained from Bambusa vulgaris presented excellent texture and adsorption properties are it was very efficient in MB dye adsorption.Downloads
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Pesquisa Florestal Brasileira (PFB) licenses all its published content under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).
- Copyright: Authors maintain the copyright to their work. PFB holds the right to the first publication, and use rights under the specific Creative Commons deed.
- Editing and revision: PFB reserves the right to edit the original manuscript to ensure conformity with the standards, spelling and grammar of the Portuguese language, while respecting the style of the author(s). The final version of the text shall be sent to the corresponding author for approval prior to publication.
- Sharing and reuse: The CC BY-NC-ND 4.0 license permits sharing of the article in its original version, as long as credit is given to the journal and the authors and the material is not used for commercial purposes. No alterations or adaptations of the original content are permitted.
- Figures and illustrations: Figures and illustrations published in PFB may only be used with express prior authorization from Embrapa Forestry.
- Disclaimer: The opinions and beliefs expressed in the texts published herein are the exclusive responsibility of their respective authors and not PFB.

